EV charger installation Ibaraki | In-house visit, same-day installation, free on-site estimate

I-S3 provides in-house EV charger installation throughout Ibaraki Prefecture. The same applies to Itako City, Mito City, Tsukuba City, and Tsuchiura City. On-site estimates are free, and for detached houses same-day installation is standard (99.9% or more); if same-day installation is performed, a same-day discount is available.

EV charger installation in Ibaraki (Itako, Mito, Tsukuba) is handled directly by I-S3. On-site estimates are free, and same-day installation is standard for detached houses (99.9% or more); same-day installations receive a same-day discount. We are a Tesla recommended installer. For apartments, confirmation from the management association comes first. Last updated: October 29, 2026

I-S3 will visit on site in Itako, Mito, Tsukuba, and Tsuchiura. Actual construction costs are around 150,000 to 300,000 yen including tax, excluding the main unit. If conditions are in place, 99.9% or more of homes can be installed on the same day. If you provide the municipality and a reply address (email is acceptable), the person in charge will send back candidate visit dates. Photos can be provided later.

What you can consult about: whether a visit is possible, distribution board/wiring/installation location, Tesla Wall Connector/J1772/stand.

Examples of EV charger installation for homes Examples of exterior wall and wiring work

There are same-day installation examples for homes in the Kanto region. View the primary information (we do not publish information that could identify private residences).

Examples of installation costs

For one residential unit, about 150,000 to 300,000 yen including tax, excluding the main unit. Allowance for additional distribution board work is generally included. The final amount will be confirmed after an on-site inspection.

on-site estimate

We check the distribution board, wiring, and installation location on site, and provide an estimate on the spot. If conditions are met, installation can be done the same day (99.9% or more for residences).

We will call you back using one reply contact

Email only is fine. If we know your municipality, the person in charge will reply with whether a visit is possible and candidate dates.

Practical checklist for Ibaraki (with a one-sentence conclusion)

Rather than the wording of the regulations themselves, we first focus on what needs to be checked in your building to move forward with installation.

Detached house, or apartment building / tenant space?

Conclusion: Detached houses are easier to proceed with at the owner’s discretion, while condominiums require first checking the management rules, the owners’ meeting, and the exclusive-use areas.

If wiring passes through common areas, approval from the management association may be required. If we know the photos and parking location, we can determine whether it is a private-home case or a common-area case.

Are the distribution board and contracted capacity sufficient?

Conclusion: If there is spare capacity in the 200V circuit and sufficient contracted capacity, additional work can be kept to a minimum.

If you have a photo of the distribution board, we can sort out the spare breaker capacity, main line margin, and whether expansion is needed before the site visit.

Wiring route and installation location

Conclusion: The distance and route from the parking position to the distribution board are the main factors in the construction period and cost.

Whether wall-mounted, stand-mounted, or concealed wiring is possible will be confirmed on site.

Cost and lead-time dividing points

Conclusion: For a standard detached house with one unit, on-site quotation and same-day installation are common. Distribution board modifications, long-distance wiring, and apartment buildings are more likely to be scheduled for another day. Actual construction costs are around 150,000 to 300,000 yen, excluding the main unit and including tax.

Conclusion: Projects in detached houses with room in the distribution board and a short wiring route are more likely to be installed the same day. We have no examples in residential properties where same-day installation could not be completed, and more than 99.9% are installed on the day of the on-site inspection.

The five main factors that affect the price are: the cable length from the distribution board to the parking space, the number of wall penetrations, whether there is attic space or buried conduit, whether a contract capacity change or main breaker replacement is needed, and whether a dedicated stand (pole) is required. Differences by model are small; these five points determine almost everything.

Photos to send before the visit that help us make a decision faster (4 items, optional)

You can start a consultation even without photos. If you have them, we can organize in advance whether installation can proceed on the day of the visit. Site inspections are available on weekdays from Monday to Friday during business hours.

  1. Overall view of the distribution board (showing the amp rating on the main breaker)
  2. Parking position, and the wall or pillar where the charger will be installed
  3. Wiring route from the distribution board to the parking space (indoor side / outdoor side)
  4. The charger you want to install (the unit or connector if you have one)

Ibaraki visit-day flow — from arrival to charging

I-S3 will visit Ibaraki Prefecture directly. As a rule, we carry out the on-site inspection, estimate, installation, and handover on the same day.

  1. Arrival and on-site confirmation: We check the main breaker capacity and available circuits in the distribution board, the parking position and charging port orientation, the cable route, and the wall material and mounting position.
  2. On-site estimate: We determine the price by applying the wiring distance, number of wall penetrations, whether conduit is required, and whether a stand is required, then present it in writing (free of charge; if same-day installation is possible, a same-day discount applies).
  3. Installation on the spot: If you approve, we add a dedicated 200V circuit to the distribution board and carry out the wiring, waterproofing treatment for wall penetrations, and unit mounting. If distribution board modifications, contract capacity changes, long-distance wiring, or exterior work are required, we will explain at that point that a separate schedule and scope are needed.
  4. Power-on, test run, and handover: We connect the vehicle, confirm that charging starts, and for models with app and Wi-Fi setup such as Tesla Wall Connector and Wallbox, we check the procedure on the spot. You can charge from that night.
White Tesla Wall Connector installed on a wood-grain wall surface (wall-mounted)
EV charger installed on a garden post (green LED lit at night)
Installation example of an EV charger wired to match the parking space

The work time varies depending on the wiring distance, number of wall penetrations, and whether a stand is required, so we will tell you after the on-site inspection together with the estimate. Records from nearby areas are in Residential properties in Kanto, same-day installation (three examples in Gunma, Tochigi, and Kanagawa, with work details and costs), and examples of the finished result are on the installation examples page.

How to proceed in Ibaraki Prefecture

  1. Share your municipality and one reply contact in chat
  2. organizes the conditions. If you have photos, a preliminary estimate is also possible before that
  3. On-site estimate at the location. If conditions are met, installation can be completed the same day; payment by bank transfer within 2 weeks after installation is standard

Service area: Itako, Mito, Tsukuba, and Tsuchiura. For the six prefectures in Kansai, visits are handled by partner companies, so the same-day installation results on this page apply to residential installations in our direct-visit service area.

What to do next (1 minute)

If you have the municipality and a reply contact, we can start guidance. You can start even without photos.

Frequently Asked Questions

Can I consult about EV charger installation in Ibaraki Prefecture?

Yes. Ibaraki Prefecture is I-S3's direct-visit service area. For detached houses, apartment buildings, stores, and business sites in Itako City, Mito City, Tsukuba City, Tsuchiura City, Hitachinaka City, Hitachi City, and others, if you share the municipality and your reply destination, we will return possible visit dates.

Can it be installed in an Ibaraki condominium as well?

It depends on the conditions. The procedure differs depending on whether the work can be completed within the exclusive-use area alone or whether wiring and openings in common areas are required. If you have the management rules and photos of the parking position and distribution board, we can organize the items to check before the visit.

What conditions make same-day installation likely in Ibaraki?

For detached houses with room in the distribution board and a short wiring route, same-day installation is likely. For residential jobs, there have been no cases where same-day installation could not be completed, and 99.9% or more are installed on the day of the on-site inspection.

What will be done in what order on the construction day?

After arrival, we check the main breaker capacity and available circuits in the distribution board, the parking position, the wiring route, and the wall material, then determine the price on the spot and present a written estimate (free of charge). If you approve, we continue with adding a dedicated 200V circuit, wiring, waterproofing wall penetrations, and mounting the unit, then connect the vehicle, confirm charging starts, and hand over the system. If distribution board modifications or a contract capacity change are required, we will explain the separate schedule and scope at this point.

Is there a preliminary estimate for installation costs?

In actual cases for one residential unit, the charger main unit is separate, and the installation cost is about 150,000 to 300,000 yen including tax. Allowance for additional distribution board work is generally included. The amount varies depending on main breaker replacement, long-distance wiring, and special work. The final amount will be confirmed after an on-site inspection.

What is an on-site estimate?

We confirm the distribution board, wiring route, and installation location on site, then provide an estimate on the spot. On-site estimates are free.

What kind of photos should I send before the visit?

The full distribution board setup (with the amperage display on the main breaker readable), the parking space and the wall or post where you want to install the charger, the wiring route from the distribution board to the parking space, and the four points of the charger you want to install. You can start a consultation even without photos. If you have them, we can organize in advance whether installation can proceed on the day of the visit.

Is it the same in Kansai?

No. EV installations in the six Kansai prefectures (Kyoto, Osaka, Hyogo, Shiga, Nara, and Wakayama) are handled by a partner visit. Ibaraki Prefecture is within our in-house visit area.

Related pages