EV charger installation Shiga | guidance after partner visit and condition review

If you are looking for EV charging spots in Shiga Prefecture (a list of public charging locations), this page is not a map of spots. It is a consultation for installing chargers at homes, business sites, and apartment buildings in Otsu City, Kusatsu City, Hikone City, and other areas. The on-site visit is by a partner, not I-S3.

The partner will visit the site for EV charger installation in Shiga (Otsu, Kusatsu, Hikone). I-S3 will organize the conditions from photos and the municipality, and will provide information on feasibility and the estimate through the partner. Last updated: October 29, 2026

Otsu, Kusatsu, Hikone, and Nagahama are by partner visit. I-S3 organizes the installation conditions, and then a partner company visits the site. If you have the municipality and a reply contact (email is acceptable), you can start the consultation. Photos can be provided later.

What you can consult about: whether a visit is possible, distribution board/wiring/installation location, Tesla Wall Connector/J1772/stand.

Who will come on site

On-site visits and installation in Shiga Prefecture are handled by a partner company. I-S3 does not visit directly itself.

I-S3's role

We organize the installation location, distribution board, and desired model conditions, and bridge you to a partner. Please share the municipality in chat first.

We will call you back using one reply contact

Email only is fine. If you let us know the municipality, we will reply with the next confirmation items and guidance route.

Practical checklist for Shiga (with a one-sentence conclusion)

Rather than the wording of the regulations themselves, we first focus on what needs to be checked in your building to move forward with installation.

Detached house, or apartment building / tenant space?

Conclusion: Detached houses are easier to proceed with at the owner’s discretion, while condominiums require first checking the management rules, the owners’ meeting, and the exclusive-use areas.

If wiring passes through common areas, approval from the management association may be required. If we know the photos and parking location, we can determine whether it is a private-home case or a common-area case.

Are the distribution board and contracted capacity sufficient?

Conclusion: If there is spare capacity in the 200V circuit and sufficient contracted capacity, additional work can be kept to a minimum.

If you have a photo of the distribution board, we can sort out the spare breaker capacity, main line margin, and whether expansion is needed before the site visit.

Wiring route and installation location

Conclusion: The distance and route from the parking position to the distribution board are the main factors in the construction period and cost.

Whether wall-mounted, stand-mounted, or concealed wiring is possible will be confirmed on site.

Cost and lead-time dividing points

Conclusion: The official amount is determined after the partner's on-site confirmation. We do not use I-S3's own-visit area construction cost examples (excluding the main unit, around 150,000 to 300,000 yen including tax) as a confirmed amount for Kansai.

Conclusion: Kansai follows the partner's schedule. We do not use I-S3's own-visit area same-day construction (99.9% or more of homes) as a promise for this prefecture.

The five main factors that affect the price are: the cable length from the distribution board to the parking space, the number of wall penetrations, whether there is attic space or buried conduit, whether a contract capacity change or main breaker replacement is needed, and whether a dedicated stand (pole) is required. Differences by model are small; these five points determine almost everything.

Photos to send before the visit that help us make a decision faster (4 items, optional)

Even without photos, you can start a consultation. If available, I-S3 will organize the conditions and share them with our partner, which can reduce the items to confirm before a site visit.

  1. Overall view of the distribution board (showing the amp rating on the main breaker)
  2. Parking position, and the wall or pillar where the charger will be installed
  3. Wiring route from the distribution board to the parking space (indoor side / outdoor side)
  4. The charger you want to install (the unit or connector if you have one)

How to proceed in Shiga Prefecture

  1. Share your municipality and one reply contact in chat
  2. organizes the conditions. If you have photos, a preliminary estimate is also possible before that
  3. On-site check after referral by a partner

Coverage area: Otsu, Kusatsu, Hikone, and Nagahama. On-site visits are handled by a partner. Please also see Kansai Hub.

What to do next (1 minute)

If you have the municipality and a reply contact, we can start guidance. You can start even without photos.

Frequently Asked Questions

Can I consult about EV charger installation in Shiga Prefecture?

Yes. You can consult about EV charger installation in Shiga Prefecture. In Otsu City, Kusatsu City, Hikone City, Nagahama City, Higashiomi City, and other areas, I-S3 organizes the conditions and the partner company visits on site.

Can it be installed in condominiums in Shiga?

It depends on the conditions. The procedure differs depending on whether the work can be completed within the exclusive-use area alone or whether wiring and openings in common areas are required. If you have the management rules and photos of the parking position and distribution board, we can organize the items to check before the visit.

What conditions make same-day installation likely in Shiga?

In Kansai, scheduling depends on the partner. We do not use same-day installation in I-S3's in-house visit areas (over 99.9% of homes) as a promise for this prefecture.

Is there a preliminary estimate for installation costs?

In Kansai, we provide guidance after the partner's on-site check.

What is an on-site estimate?

In Kansai, the partner will inspect the site before providing an estimate. Before that, I-S3 organizes the conditions from photos and the municipality.

What kind of photos should I send before the visit?

The four items are: the overall distribution board (with the main breaker amp rating visible), the parking location and the wall or pillar where the charger will be installed, the wiring route from the distribution board to the parking location, and the charger you want to install. Even without photos, you can start a consultation. I-S3 will organize the conditions and share them with our partner.

Is this an in-house visit?

No. The six Kansai prefectures including Shiga Prefecture (Kyoto, Osaka, Hyogo, Shiga, Nara, and Wakayama) are handled by partner visits. I-S3 does not visit in-house. The process differs from in-house visits in Kanto, Koshinetsu, and Fukushima.

Related pages